|
Partner Link
Spare Parts
© 2005 by RULMECA Corporation
|
|
Motorized Pulley Distributor Training
Two New Seminar Dates Announced
Download Registration Form (123KB)
|
Rulmeca Corporation will offer its popular 1.5 day Distributor Training School next Spring:
Eastern US: April 20 & 21, 2006 in Wilmington, NC
Western US: April 27 & 28, 2006 in Denver, CO
|
 |
Course Agenda:
-
Introduction to Motorized Pulley Technology
- How to Present Motorized Pulley Benefits
- How to Overcome Common Objections
- Virtual "Factory Tour"
- Troubleshooting Conveyor Drive Problems
|
 |
-
How to Calculate Conveyor HP Requirements
- Plotting Material Trajectories & Belt Cross Sections
Course Layout:
- Lectures (workbooks provided)
- Workshops (laptop computer required)
|
 |
Instructors:
- Mike Gawinski has authored numerous papers on bulk handling topics during the past 30 years and has served as lecturer and conference coordinator at bulk handling seminars and universities in North America and Europe. He has also developed industrial distribution networks and trained distributor sales personnel since 1984.
|
 |
- Jay Graham began his Motorized Pulley career more than 13 years ago. Prior to serving as Rulmeca Product Manager his responsibilities included Applications Engineer, Service & Repair Center Manager, and Motorized Pulley Assembly Technician at the Interroll Corporation Motorized Pulley factory in Wilmington, NC.
|
|
Registration:
- This course is offered to any authorized Rulmeca Corporation Motorized Pulley distributor. There is no limit to the number of participants each distributor may send.
- Cost: $195.00 (covers meals, printed materials, and software)
- Call Julie Murphy at 910-794-9294
- Or, email jmurphy@rulmecacorp.com
|
.JPG)
.JPG)
